DIY Basics: 3 Easy Steps to Defrost a Pipe

DIY Basics: 3 Easy Steps to Defrost a Pipe and how to Decrease the Occurrence of Frozen Water Pipes

One of the most common and recurrent problem in a household every winter is the development of frozen pipes. Even when you have taken every possible precautionary measure; your plumbing fixtures and pipes are still not immune to freezing. This problem is just one of the many issues and plumbing disasters the cold season brings.

To make things worse, this problem is not always spotted by the moment it is still occurring. Most of the time, it only gets detected when the frozen pipe is able to cause major plumbing dysfunctions such as malfunctioning taps and complete destruction of the pipe due to bursting.

There are various ways you can prevent and minimise the damage caused by this issue. However, when the pipe is already frozen; then what you need is an effective method to get rid of the frost while being cautious not to damage any other fixture. To get you started, here is a simple 3-step method on how to prevent as well as fix a freezing pipe problem.

Step 1: Be prepared.

The thing about house structure emergencies is that they happen in the most inopportune time. It is essential for you to protect your pipes from freezing in the first place. You can prevent or lower the occurrence of freezing pipes by covering it with insulation cables and heating cables to keep the pipes warm.

Step 2: Get to the actual fixing.

You must locate the damaged or frozen section of the pipeline. The damage is much easier to spot during spring or whenever the snow and frost begin to tune down. Look for leaks and gushing of water from the pipeline. You can also look for humps and abnormalities in the cylindrical body of the pipe. Once you have found this area; use the tips below to eliminate the frost:

*Use a hairdryer or hot gun and aim the heat directly towards the frozen area. Remember to move the heat up and down the frozen pipe to prevent the heat from focusing on a single spot. This is to ensure the pipe dries gradually and the heat is spread throughout the pipe area.

*Use a bare incandescent light bulb or heat lamp to slowly heat the pipes. Get all tarps and blankets and place them onto the pipes to trap heat inside the pipe.

*Drizzle salt over the frozen area and watch as it melts faster under the heating tools. The salt reacts with the ice to reduce its melting point which produces heat faster.

If a major pipe burst occurs then you must use a large container to hold the flowing water. After that, call emergency plumbing services immediately.

Step 3: Maintain an unblemished pipeline.

Now that you have done the steps with ample success; you need to make sure that you take care of the fixtures and practice proper maintenance. This is to ensure the pipes remain functional and do their work efficiently even through the next winter.

While knowing how to defrost pipe is handy, it’s so much better if you will be able to avoid.

You may also like

Leave a Reply

Your email address will not be published. Required fields are marked *