Propane grill cylinders have a knack for running out of power even though everybody arrives for an unexpected barbeque. If propane gas grill to a gas line connection, a DIY convert package and the assistance of an expert can just let you connect it to your grill for even more reliable cooking.
Here below, we’ve described the whole process step by step that how to connect propane gas grill to gas line?
Table of contents
- 12 Easy Steps to Connect Propane Gas Grill to Gas Line
- To Begin, Maintain safety
- Confirm That You Have a Dual-Fuel Grille
- Purchase the Appropriate Grill Conversion Kit
- Make Contact with Your Gas Company
- Turn off your gas supply
- Prepare the Grill
- Remove the top layer and the burners
- Orifices should replace
- Replace Your Bezels
- Install the Burners again
- Change Your Hose
- Prepare to Grill
12 Easy Steps to Connect Propane Gas Grill to Gas Line
Follow the below guidelines to connect your gas grill to the gas line:
To Begin, Maintain safety
This is important to maintain safety first when you will do it. Before attempting to convert a propane grill yourself, make sure you know the risks associated with propane and natural gas.
Although each converting kit and grill instructions may differ significantly, you should always consult those for precise specifics. We’ve provided a broad outline of what to consider when upgrading the setup yourself.
Confirm That You Have a Dual-Fuel Grille
Not even all grills are capable of converting from propane to natural gas. Check on the inside of your grill’s door or in your owner’s guide for a notation regarding its dual-fuel capabilities. While in doubt, usually contact the company’s brand directly.
Purchase the Appropriate Grill Conversion Kit
Each grill needs its own modification kit. These kits can buy online, and you also can buy the best gas grills under $300 in a large grilling or hardware shop or directly from the manufacturer.
Check that the model number of your grill matches the compatibility of your kit. This information is frequently found in your handbook.
Make Contact with Your Gas Company
Pick the ideal gas line plumber or contractor in your area to run a supply from your house to your grill for as little as $25 to $30 per linear foot. Tell them you’re changing your propane grill and ask if they have any suggestions for a good setup.
Turn off your gas supply
If you have a gas line valve on the street, you may have to hire a professional to adjust it.
Before you let the plumber go, enquire regarding accessing your home’s gas cutoff line. Before connecting the grill, please turn off the gas line and, of course, switch it back when you’re ready to cook.
Prepare the Grill
Seeing as there is no natural gas coming, it is vital to decommission the existing system. Check that all of the grill knobs are turn off and that the propane cylinder can remove. Ensure the LP tank valve is also closed.
Remove the top layer and the burners
Based on the size of the grill, there will generally be two to six burners. These will resemble large metal tubs with either a line of portholes from across the top to allow the fire to exit.
To remove the burners, unscrew the hitch hooks on each side of the burner. You must be able to complete this task by hand. Remove any carryover tubes that are connecting to the burners, and then carefully remove the burners themselves. It should note that each grill is slightly different, so always consult your owner’s handbook for specifics.
Orifices should replace
Your propane grill has several tiny gas jets, also known as orifices or spuds, that direct gas between the hose and the burners.
Reach inside the grill with the hex key or supplied tool and carefully loosen these little brass pieces. You can save these if you want to go back to natural gas later, but do not use them.
Replace Your Bezels
Release the knobs the front of your grill, and you must be capable of pulling them directly away from you and inspect the metal panels beneath. This bezel controlled the flow of propane, allowing you to gently roast vegetables or sear a steak.
Remove the old bezels and exchange them with natural gas bezels included in the package. Before tightening the screws, ensure the lines are correctly aligned.
Install the Burners again
This is when the prior snapshot comes in helpful. Working backward, replace the carryover bars, burners, and hitch pins in their proper locations. If you don’t ensure it appears precisely how it did before deleting them, your grill will not heat properly.
Change Your Hose
Unscrew the propane controller line from the manifold connector with a wrench. This hose is usually found on the side of the grill, beneath the side wrack.
If you ever decide to switch back to propane, you may keep this with your orifices. Install the replacement hose that comes with your conversion kit in the same location.
Prepare to Grill
Once you’ve reattached your hose and all other pieces to the grilled, you’re prepared to turn on your gas line and start cooking. However, if you’re at all concerned about your work, have a professional have a look.
Whatever option you take, the sky is the limit once you have a gas line directly connected to your grill. All that remains is to start planning all of the dishes you’ll be cooking up shortly.
Connect propane gas grill to gas line. If this method is too much for you, you may hire a natural gas grill installation for between $150 and $440, depending on your grill and configuration.
The most important thing is never to connect your natural gas line to your grill without changing it. Because the two fuels fire unevenly, will indeed your steaks be grilled improperly, but it may also be unsafe.