A garage door opener that has stopped operating as it’s expected can ruin your day. Imagine waking up to a door that isn’t closing all the way, or a remote that’s not working. It can be frustrating, right? While it may not always be clear what the cause of such problems may be, the solution could just be a step away. There are plenty of fixes you can try out to repair your garage door opener without necessarily hiring an expert from the masonry company for garage door to do the job.
If you’re having issues with your garage door opener, here are a few common problems and the simplest ways to get them fixed.
Table of contents
Remote Not Responding
If the buttons of the remote aren’t responding, check the batteries. The remote needs power to work. If the batteries aren’t the problem, ensure you’re operating the remote within close range. If it still doesn’t work, then try reprogramming the remote following the instructions in your opener’s manual.
Wall Switch That’s Not Responding
Waking up to a dead wall switch might make you think it’s over with your opener, but in most cases, it’s a solvable issue. Since the wall switch is wired directly to the opener, the problem could just be tampered connection. If the switch isn’t responding, the problem could be the switch itself or the wiring. To test whether the wiring is the issue, detach the two wires from the switch and carefully touch them together. If the opener works, then the switch could be the problem and that means it needs replacement. However, if the opener doesn’t respond on touching the wires, then you’ll have to get new wires.
A Garage Door That Isn’t Closing All The Way
If your garage door isn’t closing completely, but also doesn’t reverse you may need to check on something called the limit switch. Every garage door opener comes with an adjustable switch that determines how low the door should go to close completely. If this switch is set too high for your opening, the garage door may close partially. To adjust this, turn the screw that’s normally on the monitor unit to increase or decrease how low the door can go when closing.
A Garage Door That Reverses Before Closing
Garage doors are fitted with sensors that control their closing and opening. If your garage door reverses as soon as it’s opened, then something could be obstructing the sensors. This is very risky, and so, ensure you fix the problem before it’s too late. To solve this issue, check the two sensors on either side of your garage door frame and find out if they’re properly aimed at each other. If you notice that the alignment of the sensors isn’t the problem, then you may have to get a professional check on it. Malfunctioning sensors are risky, so don’t take chances. Get them fixed immediately.
A properly functioning opener equals a good garage door, so get the problem fixed. Garage doors play an important role in home décor, so be sure to get things right. Part of our job is to ensure you get it right when it comes to designing your home, so check out these amazing interior design ideas.